fbpx
EasyAngle FAQ2019-09-15T15:30:11+01:00

Frequently Asked Questions

EasyAngle FAQ

If your question is not answered below, please contact us.

Easyangle FAQ

How do I set the plane of measurement with the device?2019-04-02T13:52:15+01:00

The plane of measurement is dictated by the type of flexion or rotation you are measuring. You can watch a number of videos on our YouTube channel that show how to set the plane for different measurements. What is important to note is that EasyAngle measures rotations around the grip, as shown in the image. Only perform your measurement where the device is rotated accordingly. You should not perform more than one full rotation of the device during measurement.

My EasyAngle is not responding, what can I do?2019-04-02T13:55:48+01:00

If your EasyAngle freezes or becomes unresponsive, you may need to do a hard reset. Press and hold the power button for 30 seconds to do this. When you release the power button, the device should reset and you will see some small numbers briefly displayed on the screen before it returns to your measurement history display. If a hard reset does not work, contact us and we will troubleshoot further.

Do I have to follow the limb being measured as I make the measurement?2019-04-02T14:09:18+01:00

No. Once you start the measurement, you can set the device to one side or place it in your pocket as you help the patient come to their max range of motion for the joint being measured. You then take the device and align it with the devices end range before clicking the large turquoise button to complete the measurement. You can watch many examples of how to do this on our YouTube channel.

I have tried to purchase EasyAngle on this website but it does not ship to my location. What can I do?2019-04-02T14:16:36+01:00

If we do not provide shipping to your country from meloqdevices.com, you can search for a distributor in your country from this page. If you do not see your country listed, please contact us and we will arrange a special shipment.

How do I turn on EasyAngle?2019-04-17T12:24:32+01:00
Digital Goniometer, Range of motion device

To power on EasyAngle, press the power button on the left beneath the display.

I made a mistake when measuring and would like to measure again. Can I delete the previous measurement?2019-04-17T12:27:26+01:00
Angle presentation for physiotherapy, historical overview of goniometric data

Yes. If you need to delete your last measurement, you should go to your history view where you can see your last five measurements. Measurements are deleted from newest to oldest. Press the delete button which is beneath the display on the right side.

Range of Motion measurement results

The latest measurement will now be highlighted for deletion. You will see a cross and check on the display above the power and delete buttons. To delete the measurement, click the delete button again. If you do not wish to delete the measurement, just press the power button to return to the standard history view.

What is covered in the EasyAngle warranty?2019-04-17T12:29:58+01:00

The EasyAngle warranty covers factory defects which include faulty display, charging and battery issues. The warranty does not cover wear and tear and accidental damage caused by the user.

How long is the product warranty on EasyAngle?2019-04-17T16:15:04+01:00

Standard warranty is one year, however; you get one additional years warranty if you register your device.

Why is my display showing bubbles?2019-09-12T19:32:34+01:00
Contact the EasyAngle team

When you are taking a measurement, the display will show bubbles if you move outside of your plane of measurement. This feature helps to ensure you take accurate measurements each and every time. Just move back into your plane of measurement and the bubbles will disappear with your measurement once again being displayed.

Why are there two angles displayed on screen?2019-09-12T19:33:29+01:00
Contact the EasyAngle team

The device always displays two angles, the sum of which equals 180°. The larger of the two numbers displays the actual angle that the EasyAngle has measured. The smaller number which displays beneath the measurement is the supplementary angle, which is 180° minus the actual angle.

There is a strange image with an exclamation mark showing on my display, what is wrong?2019-09-12T19:36:05+01:00
Contact the EasyAngle Team

An exclamation mark accompanied by an image of the device is a bump warning. This denotes that the device has been bumped or moved too fast during the measurement causing an acceleration error. This will abort the measurement. You will need to restart your measurement if you get this warning.

Contact the EasyAngle team

An exclamation mark accompanied by an image of an hourglass is a timeout warning. This denotes that the measurement has taken more than one minute. This will abort the measurement. You will need to restart your measurement if you get this warning.

How can I take a simple measurement?2019-09-12T19:37:22+01:00
Contact the EasyAngle Team

Step 1

Press the large turquoise button to enter measurement mode. You will see a flashing zero on the screen. This lets you know you are read to select your plane of measurement.

Contact the EasyAngle Team

Step 2

Align the device with the first limb and then press the button again to start measuring. Ensure that your patient does not move during measurement.

Contact the EasyAngle Team

Step 3

Align the device with the second limb and press the button to end the measurement. The angle is calculated and shown on the display along with an arc that visualises the direction of the angle.

Contact the EasyAngle Team

Step 4

Press the large turquoise button again to view the measured angle together with the previous four measurements.

The EasyAngle FAQ is intended to answer our most frequently asked questions. From how to use the EasyAngle to some basic troubleshooting, we think we have it covered.

EasyAngle faq